| |
- Monoblock power amplifier
- Delivers 550 watts RMS
- Same circuit design as kw550 power amp
- Accessories: IEC type power cord (10-Amp type), speaker cable
Supercharge Your System to 550-Watts
'Five Stars' from What Hi-Fi? Magazine
The new Musical Fidelity 550K Supercharger is an impeccable-sounding monoblock power amplifier whose power output, build quality, and overall sound harks back to the Golden Age of hi-fi. It delivers a huge 550 watts into 8 ohms, or an absolutely massive 750 watts into 4 ohms.
"The higher the volume, the more the 550Ks relish it, rampaging through any source material with absolute and effortless authority," reports What Hi-Fi? magazine, which awards the 550k Supercharger its top rating of Five Stars. "Low frequencies are of an entirely different order: depth, tonal variation and decay are of the impeccable variety."
A Return to the Golden Age
In the 1960s, the Golden Age of hi-fi, top-quality systems were capable of delivering musical dynamic range accurately. High-sensitivity loudspeakers, coupled with high-quality tube amps, (e.g. McIntosh 275 Radford STA100) would comfortably deliver realistic peaks of 110 dB or more. What's more, because the loudspeakers were very sensitive, the 'slam' and speed of the systems were extraordinary.
Contrast that Golden Age with what we have today. Most amplifiers are not significantly more powerful than the McIntosh 275, while the speakers are at least 10 dB less sensitive than those from the golden age. The result? Systems that might be less colored, but are incapable of approaching a realistic dynamic range.
The 550K Supercharger is the perfect antidote to anemic amps and receivers. It allows you to experience true hi-fi as it was meant to be heard.
Same Circuitry as the Highly Acclaimed kw550
The 550K's circuitry is exactly the same as Musical Fidelity's highly acclaimed kW550 power amplifier. Its hallmarks are ultra-low distortion, super quality, great linearity, and superlative tonal performance. It will comfortably deliver about 250 amps peak-to-peak with a massive voltage swing. It will drive any loudspeaker with ease and deliver astonishing dynamics.
The 550K Supercharger is housed in a modern sleek package with a small footprint and can easily be positioned next to or behind your existing loudspeaker.
Please note that because the Supercharger is a monoblock amplifier, you'll need a separate Supercharger for each channel of your system.
You Can Also Use It with Your Existing Amp
You can also install the Supercharger between your existing amplifier and loudspeakers. Nothing else has to be changed or touched. The Supercharger increases the power of your existing amplifier from 50 watts to more than 550 watts. It has an on/off signal sensing circuit, so it is ready when your music is ready.
SPECIFICATIONS
- Power: 550 Watts into 8 Ohms (27 dBW); 750 Watts into 4 Ohms
- Voltage, RMS: 66 Volts 20Hz to 20 kHz
- Voltage, Peak-to-peak: 186 Volts
- Current peak-to-peak: 250 Amps
- Damping factor: 220
- Output devices: 12
- Thermal cut out (internal temp): 70-degrees C
Line Input
- THD + noise, 20Hz to 20 kHz: <0.016%
- Signal / noise ratio: > 120dB 'A'-weighted
- Input sensitivity for 550 watts: 2.23V
- Input impedance: 50k Ohms
- Frequency response: 20 Hz to 30 kHz, +0, -0.2dB
Speaker Input
- Signal / noise ratio: > 115dB 'A'-weighted Input sensitivity for 550 Watts: 33V Input impedance: 50 Ohms
Connections
- Line level inputs: 1 line level RCA connector
- Speaker inputs: 1 pair 4mm banana plug/binding posts
- Speaker outputs: 1 pair 4mm banana plug/binding posts
Physical
- Power requirement: 100 / 115 / 230 Volts AC 50 / 60Hz (factory pre-set), 1000 Watts maximum into 8 Ohms, 53 watts idle
- Weight: 26-1/3 lbs. each
- Dimensions: 8-1/2" diameter, 16" high (including feet),

|
|
|