Tesla JJ 300B
These Tesla 300B's are dual point matched for the best musical accuracy possible. Every pair is inspected at the factory and comes with test certificates for each tube. They are labelled as "JJ", and have an attractive white ceramic base.
SPECIAL --- $275 FOR A MATCHED PAIR !!!!
A WONDERFUL SOUNDING 300B TUBE ...
The tube's internal electrode system is assembled in a clean-room environment. The compontnts are made from pure materials and manufactured with high precision (+/- 0.02 mm). Before assembly, all parts are cleaned in an ultrasonic bath and de-gassed in a reducing atmosphere. The control grid is gold plate, the screen grid is plated with copper and graphite. Specially designed fixtures are used during assembly to prevent electrode deformation. Spot welding is used to electrically connect the internal subassembly to the contacts of the tube base. A complete mechanical and electrical inspection is performed on every system.
The tube's internal systems are thoroughly cleaned again and inserted into a clean glass envelope. The envelope is them hermetically sealed to the base. The seal between the envelope and the base is thermally stress relieved (tempered).
Assembled tubes are evacuated on an automated pumping machine with mechanical and diffusion pumps. During this process, the cathode is electrically heated and its emission substance is activated. All internal parts are heated by high frequency coils, the getter rings are ignited absorbing the residual gas inside the tube. The final vacuum reaches 10-6 Torr - the level required for proper tube operation.
The evacuated tubes are equipped with sockets. The cathodes are activated and the electrodes' potentials stabilized in a special burn-in unit. Here, the tubes are exposed to electrical conditions reaching up to 300% of the nominal operating levels.
Every tube is electrically tested for parameters such as isolation characteristics, the electrode's current levels covering the entire operating curve, the condition of the vacuum, cathode emission capability, filament voltage and current levels. A microphonic test is performed on every tube. All tubes are then further burned-in for a period of 24 hours at the nominal specified operating voltage and current levels. Every month, a random sample is taken from the production to perform a life test of 5000 hours at nominal operating conditions or 1000 hours at maximum specified levels.
300B - R.F. Triode
Moderate power, filamentary triode for Class A service
Base: Four Pin Ceramic Base
Uf 5 V
If ca. 1.3 A
Typical Characteristics: Ua = 300 V S = 5.5 mA/V
Ug1 = -61 V Ri = 700 O
Ia = 60 mA µ = 3.85
Limiting Values: Ua = 450 V Wa = 40W
Maximum plate current of average tube for fixed bias:
Ia = 100 mA Maximum plate current for manually adjusted grid bias or self-biasing:
Capacitances: Cg1 = 17 pF Cg1-a = 7.5 pF
Ca = 11 pF