Classy Two-Chassis Hybrid Design Phono Stage

Vincent Audio's new two-chassis PHO-700 MM/MC phono stage puts its low-noise power supply in a completely separate chassis for pristine signal quality. It will reward you with an amazing vinyl experience. Separate cases for audio and power supply circuitry help isolate the signal chain from AC distortion and interference.
The PHO-700 performs its RIAA correction with high precision for ultra-low distortion and uses the highest quality audiophile parts, inside and out. It has a single phono input, which can be switched to accommodate low-output MC cartridges or MM/high-output MC cartridges.

"It Blew Me Away"

"The PHO-700 may be one of Vincent’s best designs to date, meeting the challenge of building a phono stage with low-noise and as much loss-free transmission as possible," raves Peter Stanton-Ife in his HifiPig.comreview for January 28, 2015. "[It] generally blew me away on all sorts of music. I had to remind myself of the cost of this phono stage… I genuinely struggle to think of a phono stage below £1000 which will best this unit…"

Vincent's Best Compact Preamp to Date

For more than ten years, Vincent Audio has been successfully designing and manufacturing phono preamplifiers. The new PHO-700 may be the German company's best compact preamp to date. Often overlooked in the digital era, vinyl has recently been experiencing a dramatic comeback. The preamp is a necessary component, which allows you to connect your turntable to receivers, amplifiers, and other gear that lack a dedicated phono input.
In a record player, the output signal is at amuch lower level than the signal from a line stage component, such as a CD player. So the challenge in building a great sounding phono stage is to provide a low-noise and loss-free transmission. Vincent met that challenge and exceeds expectations with the PHO-700.

Highly Regulated Separate-chassis Power Supply

Vincent has deliberately omitted the typical 'wall-art' AC power adapter, opting for a specially designed and highly developed outboard power supply instead. Feeling is believing. The power unit has impressive heft when held in the hand and testifies to the quality of the transformer, metal chassis, shielding, and other components.
This no-compromise approach to power helps the PHO-700 to achieve its low-noise performance. The PHO-700 uses the same power supply that is already employed to great advantage in Vincent's critically acclaimed PHO-8 phono preamplifier. It is connected to the separate-chassis audio circuitry using a nine-pin DIN cable. The voltage is highly regulated and filtered, so that the ripple and hum found in unconditioned AC power right out of the wall will not reach the phono section. The delicate audio circuitry only receives clean power.

Vacuum Tube Circuitry for Smooth, True-to-Life Sound

The PHO-700 delivers the luxurious sound that can only be obtained with finely-made vacuum tube equipment as well as the power associated with solid state designs, including speed, reliability, and control. That's a difficult combination to beat, especially once you factor in the affordable price.
Look inside the front panel 'window' of the PHO-700 and you'll see a 12AU7 vacuum tube used in dual triode mode. This contributes to the warm, true-to-life sound. High-quality components from Nichicon, Wima, and other companies improve the parameters of noise ratio and amplificati.