| |
Hybrid Stereo Pre-Amplifier SA-T1
The SA-T1 is a very special hybrid pre-amplifier. The visible tube takes care of the current supply whereas the signal processing tubes are located at the rear part of the pre-amplifier in order to achieve the shortest signal path possible. In a review of STEREOPLAY magazine (07/2003) this pre-amp could demonstrate that it's not only pretty to look at. The verdict of STEREOPLAY was "Top Class" with an outstanding price-performance ratio: "....quite unlike many of its competitors, the SA-T1 did not flatten the musical rendition but was able to display the music's vividness, atmosphere, light and information of space with stunning verve."
Technical Details
| Frequency range: |
20 Hz - 20 kHz +/-0,5 dB |
| Nominal output voltage: |
2 V |
| Input sensitivity: |
280 mV |
| Total harmonic distortion: |
< 0,1 % (1 kHz, 1 Watt) |
| Signal-to-Noise Ratio: |
> 90 dB |
| Input Impedance: |
47 kOhm |
| Mains supply: |
230 V/50 Hz |
| Inputs: |
6 x RCA |
| Outputs: |
2 x RCA, 1 x RCA Rec Out |
| Dimensions (W x H x D): |
430 x 95 x 390 mm |
| Weight: |
8 kg |
| Colour: |
black/silver |
|
Tubes: 2 x 12AX7; 1 x 12AU7 |
 front view
 back view
|
|
|
