Zpre 2 Stereo Pre-amp with remote Control

The Zpre2 two channel preamplifier, with 4 Audio & Video inputs with 2-way RS-232 control is the second generation of one of the world's most popular and proven preamplifiers. It has been designed for a wide variety of applications, including multi-room, multi-zone installations, desktop audio, PC-Mac audio, bedroom or den systems. The versatility of  
the Zpre2 allows many connection and configuration options.

• Two way RS-232 serial connection
• Four line-level audio and four composite video inputs
• Input 1 auto select priority function, defeatable
• External IR repeater Input jack
• Remote control includes discrete codes for Off and On
• Switchable auto or manual turn on/off
• 12 V trigger automatic turn/off, defeats Power button
• 12V output to trigger other components
• Record outputs for video and fixed level audio
• eadphone jack, automatically mutes line out
• Gold-plated RCA jacks
• Analog motor-driven volume control
• Outstanding design, parts quality and specs
• Voltage switchable between 115v and 230v
• Unique half-rack width chassis; 1 rack space high
• Fastening hardware available for rack mounting
• Parasound 2 year parts, 2 years labor   warranty  
     (For USA and Canada purchases only)

        Frequency Response:  
        10 Hz - 100 kHz, +0/-3 dB  
        10 Hz - 50 kHz, +0/-8 dB

        Frequency Bandwidth - Composite Video:
        10 MHz

        Total Harmonic Distortion:
        0.006%

        S/N Ratio:  
        112 dB, input shorted, IHF A-weighted  
        92 dB, input shorted, unweighted

        Input Impedance:
        15 k O

        Input Sensitivity :  
        150 mV for 1 V output  
        Maximum Output: 7.6 V

        Crosstalk:  
        83 dB at 1 kHz  
        76 dB at 20 kHz

        Tone Controls:  
        Bass +/- 8 dB at 100 Hz  
        Treble +/- 10 dB at 10 kHz

        AC Power Requirement:  
        110 - 120 V / 220 -240 V, 50 - 60 Hz  
        2 watt standby; 20 watts when turned on

        Dimensions  
        9.5" Wide  
        10" Deep with connectors  
        2" High with feet, 1.75" panel only  
        241 x 254 x 50mm, 44.1mm panel only  

        Net Weight  
        4.6 lbs / 2.1 Kg

        Rack Mount Accessory  
        May be Purchased Separately  
        SBS: Bracket & bolts to attach any two Z Custom units side-by-side  
                in a standard 19" equipment rack.  
        Zblank: 9.5" x 1.75" blank panel, required to mount a single Zhd unit;  
        Zblank kit includes one SBS